For large excavators operating on construction sites as well as in mining and quarry applications, we manufacture buckets from top-grade materials with a strong emphasis on strength and wear resistance, now incorporating Hardox® 500 TUF. The design is fully optimized for the specific brand, machine model, and working conditions. Our custom-built buckets deliver high performance precisely according to the customer’s requirements for economical, reliable, and profitable machine operation. The Hardox® In My Body certificate confirms the authenticity of the material used, guaranteeing unmatched performance, service life, and cost savings for the user.
Redefining durabilityProducts that are lighter yet built to outlast the rest.
With Hardox® 500 TUF
You load more material
A lighter bucket with the same capacity
Extended service life
Reduced fuel consumption
Bucket ranges for excavators over 50 tons
Choose the range to suit your application
[ General duty ]
General duty HXG
The lightweight HXG bucket is a versatile tool designed for environments with easily breakable materials. Its low weight reduces operating costs, for example in earthmoving, loading construction aggregates, or supplying recycling lines. It is particularly suitable for working with materials in excavability classes 1 to 4 (topsoil, clay, sand, loam, weathered soft limestone, or marlstone). The bucket shape is optimized for easy ground penetration, while the body provides high strength, exceptional hardness, guaranteed toughness, and long service life even in abrasive conditions.
[ Reinforced HD ]
Reinforced HD HXR
The reinforced HXR bucket is an excellent and high-performance tool for working in medium-hard to hard-to-break materials of excavability classes 4 and 5. It is designed for demanding digging in soils and rock materials such as dense clay, soil mixed with sand or gravel, fractured or weathered granite, slate, marlstone, construction debris, or frozen ground. This bucket also performs effectively in demolition applications.
[ Severe duty rock ]
Severe duty rock HXS
The HXS rock bucket is manufactured from selected wear-resistant and high-strength steels and engineered for working in hard-to-break rock materials of excavability class 5 and above. This bucket series is designed for extremely demanding applications involving rocks such as crushed granite, slate, basalt, sandstone, and similar materials. It withstands both abrasion and impact loads. The design reflects user requirements for economical machine operation and fast work cycles.
[ Extreme duty rock ]
Extreme duty rock HXE
The HXE bucket designation combines the abbreviations HX = Hardox and E = Extreme. This product, made from high-quality steels, is intended for daily use in the most demanding environments with high abrasion and impact loads, particularly when working in hard-to-break rock materials of excavability class 5 and above. Our HXE buckets demonstrate their reliability and long service life when handling mineral materials such as granite, slate, basalt, sandstone, as well as class 7 solid rocks fragmented by blasting. They are an excellent choice for quarry operations.
For excavators up to 50 tons, we offer the standard HSG, HSR, HXG, HXR, HXS and HXE/HXQ bucket ranges. Excavator buckets →
Custom design and protection
Equipment tailored to your operating conditions
Click a number on the model or in the list to see how we adapt the bucket to your machine and material.
For larger machines, you can choose between a reinforced, rigid single beam suitable for most standard applications or a double beam providing excellent force transmission and long service life even in the most demanding rock-extraction conditions.
Our buckets are equipped as standard with bottoms made from high-strength steel offering excellent wear resistance. For extremely abrasive loading and mining conditions, the service life can be further extended by adding internal transverse or longitudinal wear plating with hardness ratings of 450, 500, or 700 HB.
Wear-resistant elements with a hardness of 700 HB, available in various shapes and sizes, provide excellent protection against abrasive wear.
Easily replaceable wear caps reduce maintenance time and costs. They are made from higher-hardness material than weld-on covers and offer a longer service life. Recommended for handling medium to highly abrasive materials.
The service life of the lower side sections of the bucket, at the junction with the bottom, can be significantly extended by using wear-resistant cast corner wear shoes. We offer a wide range of shapes, sizes, and hardness levels.
The cutting edge is one of the most wear-exposed parts of the bucket, and replacing a worn edge is among the most costly repairs. Therefore, it is economically advantageous to protect the inter-tooth section with a suitable, easily replaceable or weld-on wear cover.
The cutting edge can be straight for digging and material loading, or spade-nose-shaped/modified to improve penetration in mining applications.
Custom solutions
We customize buckets to meet individual user requirements
Additional wear-resistant elements 700 HB for environments with extreme abrasionDouble-replaceable side protectionsCustom-made guide rails matched to the demolition ball
Why do we prefer Hardox® 500 TUF?
Hardox® 500 TUF is a revolutionary material
S355
Hardox® 400
Hardox® 450
Hardox® 500 TUF
4×+longer service life than S355 structural steel
The ability to reduce weight and increase bucket volume, lowering fuel consumption.
More work in less time, higher productivity, and reduced CO₂ emissions.
Long service life, excellent strength, and significantly lower maintenance costs.
Anyone can buy buckets certified with Hardox® In My Body, but only selected manufacturers are authorized to produce them. The trademark on the product confirms that it is made from genuine Hardox® steel and represents a premium component with outstanding toughness and durability.
Why choose a Renomag bucket?
Five benefits you gain
Maximum breakout force
Optimized deep bucket body shape for a 100% fill factor, with a radius minimizing the distance from teeth to hanger for maximum digging force transfer.
Easy loading and dumping
The dual-radius bucket bottom improves material penetration, speeds up the loading and dumping cycle, and significantly enhances the wear resistance of the bucket floor.
Fast work cycle
The conical bucket body, which narrows from the cutting edge toward the hanger, and the bottom, which narrows from the edge toward the rear, increase work productivity, minimize penetration resistance, reduce machine fuel consumption and wear, and accelerate the excavation and material handling process.
Excellent penetration and versatility
We prefer ESCO® tooth systems for their excellent penetration and durability. They are advanced and cost-effective, meeting user requirements when operating machines in diverse working conditions.
Hardox® In My Body durability
Anyone can buy buckets certified with Hardox® In My Body, but only selected manufacturers are authorized to produce them. The Hardox® In My Body trademark on the product confirms that it is made from genuine Hardox® steel and represents a premium component with outstanding toughness and durability.
Which Renomag bucket suits you best?
Pick a material, we'll recommend a bucket
The right range depends on the abrasiveness of the material and on impact loading. Click a material or a bucket range.
LowAbrasionHigh
LowImpactHigh
The classification is indicative, based on the Renomag catalogue.
